螢光燈簡介 – 直流、可調光

本文將介紹直流輸入和可調光螢光燈。透過我們的建議，您將找到最適合您的直流輸入和可調光螢光燈應用的螢光鎮流器。

直流輸入螢光燈

Fluorescent lamps are designed and produced for both alternating current (AC) and direct current (DC) input. Fluorescent tubes are almost always powered with alternating current (AC), however, due to diverse lighting demands some fluorescent lamps have circuit that utilizes direct current (DC). DC fluorescent lamps are well-liked for use in recreational vehicles and off-the-grid housing.

DC fluorescent light bulbs are good for remote and self-standing power supplies, such as DC batteries, cars, boats, yachts, solar off-grid systems, trains, airplanes, and more self-sustaining power systems. The distance between the power source and the light itself is not too far and power can still be distributed without a large power loss. DC fluorescent lamp has been found to be relatively effective in various lighting situations. For instance, over the dining table in a caravan, where soft clear lighting is required for many hours. Without the light being glary to the bare eye when the light source is close-up, or when the fluorescent light fixture is protruding too low over the table.

適用的 Antron 鎮流器： 直流輸入電子鎮流器

可調光螢光燈

Can dimmers be used with fluorescent lamps? The answer is positive. You can apply a dimmer switch to fluorescent lights, but here are the conditions you need to confirm before using dimmers with fluorescent lamps. Firstly, confirm whether dimmers are compatible to fluorescent lights. It’s crucial to beware when you want to dim fluorescent lights. A standard dimmer switch on its own might not be compatible. Secondly, you will need a ballast designed to work with a dimmer which can be dimmed. Lastly, note that there are three types of fluorescent lights: standard fluorescent lights, integrated CFL lights and non-integrated CFL lights. Fluorescent lights are long-shape tubes, CFLs are twisted into a compact-shape light bulb. For integrated CFL lights, the ballast is built into the bulb base. As for non-integrated CFL lights, the ballast is installed separately in the fixture or next to the CFL light. To sum up, you need a compatible dimmer designed for fluorescent or CFL lights, and a dimmable ballast or dimmable bulbs for integrated fluorescent lights.

確保您使用的鎮流器可以與相容的調光控制器配對。這樣您就可以根據需要調整光輸出。這些可調光螢光燈非常適合辦公室、董事會議室、會議室和會議區以及大多數照明應用。它非常適合乾燥區域的室內場所。或者，我們也提供適用於潮濕區域的可調光螢光燈，可用於可能存在濕氣的區域，例如商用衛生間或雜物間。

適用的 Antron 鎮流器： 步進調光螢光燈鎮流器