安創電子為您的照明應用提供各種電子螢光鎮流器解決方案。
日光燈
螢光燈是室內照明的常見光源之一。依管徑分類，常見的螢光燈管可分為T5、T8、T10、T12等，此外還有2D螢光燈、CFL螢光燈、BIAX-PLL螢光燈、圓形螢光燈等。不同螢光燈管徑大小及發光效率不同。螢光燈管越直、越長，電流越容易通過，發光效率越高。電子鎮流器是螢光燈發光效率的關鍵。電子鎮流器提供穩定的電流輸出，提高能源效率，不受外部電源電壓的影響。這些優勢使其能夠輸出更明亮的光，並提供更穩定的光源供應。
電子鎮流器的設計是影響螢光燈壽命和效率的關鍵。針對螢光燈使用場所的不同，電子鎮流器的選擇也有所不同。例如，在開關燈頻繁的場所，建議使用具有預熱功能的電子鎮流器，這樣既不受開關次數的限制，又能延長螢光燈的使用壽命。對於需要立即開啟螢光燈的場所，可以考慮使用瞬時啟動型電子安定器，並利用高電壓快速啟動螢光燈。
Antron fluorescent ballast offer diverse start-up mechanisms that can be classified into 4 types: Instant Start, Modified Rapid Start, Program Start, and Rapid Start. With different types of start-up mechanisms, the ballast will have your lamp warmed up and prepared before lighting up. This particular step will extent the lifespan of your lamps considerably and prevent lamps from blackening. Antron ballasts work with T5, T8, T10, T12, 2D, CFL, BIAX-PLL and circular lamp with universal input voltage 120-277V, 347V or 480V. Some electronic ballasts have minimum starting temperature of -22℉/-30℃. Antron Electronics provides high-quality fluorescent light ballast with UL/cUL certification, and most of our ballasts have 5 years warranty.
Moreover, we also have step dimming ballast and DC input ballast series. Antron’s all-embracing electronic ballast for fluorescent lamps and ballast light fixtures will satisfy your requirements and needs.
推薦系列：
螢光燈鎮流器
植物生長照明
植物生長燈通常用於室內園藝，作為室內植物照明的補充，為植物重建一個適合生長的環境。利用人工光源補充室內光照不足的不足，使植物即使在室內環境或冬季自然光照不足的情況下也能健康生長。植物生長燈模擬自然光的光譜波長、溫度和強度。透過模擬自然光的光譜波長、溫度和強度，植物生長燈為植物培育提供人工光源，刺激植物進行光合作用。不同植物所需的光強度、光質和時間也有所不同。陽光是由七種光譜混合而成。與普通的室內螢光燈不同，植物生長光譜以波長400~520nm的藍光和波長610~720nm的紅光為主。植物照明可以製成全藍光、全紅光或紅藍混合燈，為植物提供進行光合作用所需的光線。例如，紅光光譜使植物開花，而藍光光譜則促進植物營養生長。
螢光燈常用於室內蔬菜或草本植物的生長，是家庭園藝照明最常見的選擇。標準螢光生長燈有多種形狀，管狀螢光燈最為理想，例如T5、T8和T12。小型螢光燈也很有用，例如CFL預熱燈或快速啟動燈，它們都節能高效。通常，亮度最高的T5螢光燈適合植物繁殖。至於T8、T12和CFL螢光燈，其強度相對較弱，適合對光照需求較低的植物。以蔬菜或開花植物為例，光週期在植物發育階段至關重要，有助於植物開花。
Antron provides a variety of electronic ballasts for plant lights with four different starting methods: Instant Start, Modified Rapid Start, Program Start, and Rapid Start. These starting methods preheat lamps and prevent lamp blackening and prolong lamp lifespan. Antron provides series of ballasts for T5 lamps from 8W to 96W, and ballasts for T8 lamps from 8W to 96W. As for CFL fluorescent ballast, we have ballasts for CFL lamps from 7 watts to 70 watts that can be applied with PLC, PLT lamp. If you have requirement for dimming, Antron designed fluorescent ballasts with step dimming function. The ballast allows you to control brightness as 100% or 50% by a simple switch. Step dimming ballasts is suitable for T5 and T8 fluorescent lamps from 17 to 55W. Besides AC input ballasts, we also provide ballasts with DC input. Antron DC input ballasts are for 14W to 42W T5 and T8 lamp. Antron Electronics provides high-quality fluorescent light ballast with UL/cUL certification, most of our ballasts have 5 years warranty. Our all-embracing electronic ballast for fluorescent lamps and ballast light fixtures will satisfy your requirements and needs.
推薦系列：螢光燈鎮流器
